Very few photos are shown exactly as they were taken. A tour header wants a wide strip, a featured update block might want a tall portrait frame, and a grid of thumbnails often wants every picture the same shape. To make a photo fit, the page crops it, and unless something tells the page where the subject is, it simply keeps the middle. That works for a centred landscape shot, but it is how a portrait of someone standing ends up showing their waist and knees instead of their face.
A focus point solves this. It is a single spot on the photo, usually the face or the most important part of the subject, that the page keeps in view whenever it has to crop. This guide explains how focus points work, when an automatic guess is good enough and when it is worth a few seconds to set one by hand.
Why photos get cropped at all
Web layouts are built from boxes. Each box has a fixed shape so the page looks tidy at every screen size, and the photos inside have to fill those boxes. You have two choices when a photo's shape does not match its box:
- Fit the whole photo inside the box. Nothing is lost, but you get empty bands at the sides or top and bottom. This is fine for a library or admin view where you want to see the full picture.
- Fill the box and crop the overflow. The layout looks clean and consistent, but part of the photo is hidden. This is what most public-facing pages do, because it looks far more polished.
The trouble is the difference in shape can be large. A tall portrait photo dropped into a wide landscape frame may lose more than half its height. If the crop is centred, the part that survives is whatever happened to be in the middle of the original.
What a focus point actually does
A focus point is stored as a pair of coordinates, roughly "this far across and this far down" the photo. When the page crops the picture into a frame, it slides the visible window so the focus point stays inside it, as close to the centre as the frame allows. The photo itself is not edited. The same original can be shown in a wide header, a tall block and a square thumbnail, and each crop keeps the subject in view.
Because it is information about the photo rather than a change to the file, a focus point can be changed at any time. Move it and every page that uses the photo picks up the new position the next time it loads.
| Photo and frame | Centred crop | Crop around a focus point |
|---|---|---|
| Standing portrait in a wide header | Middle of the body, head often cut off | Face and shoulders kept in view |
| Landscape shot with the subject on the left | Empty scenery in the centre | Window shifted left to include the subject |
| Close-up already centred | Usually fine | Same result, no harm done |
| Two people at opposite edges | Neither person whole | Keeps the one you choose |
Automatic focus points: good enough most of the time
Setting a focus point by hand on every image in a large library would be a full-time job. Automatic detection does the bulk of the work by looking for the most likely subject, usually a head, and placing the point there. For a typical set of portraits, fitness shots or travel photos with a person in them, the guess is right for the large majority of images.
Automatic points tend to do well with:
- A single person, facing roughly towards the camera.
- Head and shoulders shots and standing portraits.
- Photos where the subject stands out clearly from the background.
When to set a focus point by hand
Some photos fool any automatic method. It is worth checking, and correcting where needed, when:
- There are two or more people and you want a particular one kept in view.
- The pose is unusual, such as lying down, turned away or seen from above.
- The subject sits near the edge of the frame.
- The important thing is not a face at all, for example a pet's paw, a plated dish or a detail on a product.
- The photo is a set cover, because covers are used on the most visible parts of a site.
A practical approach is to let automatic points handle everything, then spend a few minutes on the covers and on any photo you know will be featured. Those are the pictures visitors see first, so they deserve the extra care.
Tips for photos that crop well
A focus point helps a lot, but it cannot invent part of a picture that was never there. A few habits at the shooting and selection stage make cropping easier:
- Leave some space around the subject. A photo framed tightly to the top of the head has nowhere to go when a wide crop is needed.
- Mix orientations within a set. Having both portrait and landscape shots means each frame shape has a natural fit. Our guide to galleries that fit portrait, landscape and square photos explains why that matters.
- Choose covers that survive cropping. A cover is shown in many shapes, so pick one with the subject clearly in the frame.
- Check the result on a real page. A quick look at the tour and members area after publishing catches any crop that needs adjusting.
How Members CMS handles this
Members CMS gives every image a focus point. By default it is set automatically and aims at the head. If the guess is off, open the photo in the gallery lightbox and set the point by hand with the crosshair. The original file is kept untouched; only the focus point is stored.
Tour pages and members areas use the focus point wherever a photo is cropped into a frame. Featured update blocks on the tour alternate between landscape and portrait frames, and the photos are fitted around their focus point, so the subject stays in view whichever shape the block uses. Our guide to tour pages that show your latest updates covers how those blocks fit into the rest of the tour.
Library thumbnails in the admin area work differently on purpose: they are fitted inside a square and never cropped or enlarged, so you always see the whole picture while you are organising content.
Frequently asked questions
What is a focus point?
A spot on the photo, usually the subject's face, that stays in view whenever the picture is cropped to fit a frame.
Does a focus point change the original photo?
No. It is stored as information about the photo. The original file is not edited.
When should I set one by hand?
When an automatic guess misses, for example with two people, unusual poses or a subject near the edge.
